Entering The Coordinate Of The Destination - Alpine INE-W940 User Manual

3.1.7 Entering the coordinate of the destination

You can also select a destination by entering its coordinate. Do as follows:
1. In the Navigation menu, tap
2. Open the
3. You can enter the latitude and longitude values in any of the following formats: decimal degrees;
degrees and decimal minutes; or degrees, minutes and decimal seconds.
4. (optional) If necessary, tap
in UTM format.
5. When finished, tap
6. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
destination.
7. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
.
menu and tap
.
to confirm the destination, or tap
and start your journey.
.
then
) appears at the new location. Tap
to modify route parameters, or tap
50
and enter the coordinate
to select a different