Table of Contents
Advertisement
7.
The initial setup is now complete. The Configuration wizard can be restarted later from
the Settings menu (page 65).
After the initial setup, the Map screen appears and you can start using the software.
2.1 Buttons and other controls on the screen
When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, the software saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type
Example
Button
Button
with
value
Icon
List
Description
Tap it to initiate a function, to
open a new screen, or to set a
parameter.
Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button.
Shows status information.
When you need to select from
several options, they appear
in a list.
8
How to use it
Tap it once.
Tap it once.
Some icons also
function as a button.
Tap them once.
Grab the list anywhere
and slide your finger
up or down.
Depending on the
speed of the sliding,
the list will scroll fast
or slow, only a bit or
till the end.
Alternatively, move
between pages with
the
and
buttons and tap the
value that you want.
Advertisement
Chapters
Table of Contents
