Selecting An Intersection As The Destination - Alpine INE-W940 User Manual

5. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
destination.
6. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap

3.1.1.6 Selecting an intersection as the destination

To enter an address as the destination, do as follows:
1. In the Navigation menu, tap the following buttons:
2. Select the country, state and city/town as described earlier (page 22).
3. Enter the street name:
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
•
The most likely street name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
automatically, tap
to confirm the destination, or tap
and start your journey.
(if you have selected a city/town above, this step is not needed).
) appears at the new location. Tap
to modify route parameters, or tap
,
). Select the street from the list.
31
to select a different
.