Connecting To An Av Controller With Xlr Output - Onkyo PA-MC5501 Instruction Manual

Connecting to an AV Controller with XLR output

Since many users will purchase the amplifier together with the Onkyo AV controller PR-SC5509, here is an explanation
of how to connect the amplifier to the PR-SC5509. For more details, see the instruction manual of the connected
component.
Note
• When using the balanced inputs, do not connect anything to the RCA inputs.
• Make sure that the balanced cable is not split. The split balanced cable may be the cause of noise.
• If a device with the USA type terminal is connected, the phase will be reversed. In this case, swap the polarity of the XLR connector in
order to set the polarity to the European type before connecting.
The amplifier
AV controller
XLR type Balanced cable
From the AV controller
From the amplifier
En
13