Connecting With Onkyo Ri Components - Onkyo A-9130 Instruction Manual

Connecting with Onkyo RI
Components
a RI Cable, b Digital Coaxial Cable
a
b
Connection and Setup
If you have an Onkyo CD player, tuner, network audio
player, or RI dock, if these have RI jacks, then you can
connect them to this unit and link switching between on and
standby, and use the remote controller of this unit to
centrally control the equipment. (RI function)
These linked operations are enabled by the connection with
an RI cable between the equipment with an RI jack and this
unit, and the connection using a Digital cable or Analog
audio cable. Refer to the following table for connections.
When connecting to the DIGITAL IN COAXIAL D1 jack, use
a Digital coaxial cable. When connecting to the DIGITAL IN
OPTICAL D2 jack, use a Digital optical cable. When
connecting to LINE IN 1/2/3, use an Analog audio cable.
Equipment connected
CD player (*)
Tuner (*)
Network audio player / RI
dock
(*)Setup: When connecting a CD player or tuner, settings
CD
Jack to connect to
DIGITAL IN COAXIAL D1
or LINE IN 1
DIGITAL IN OPTICAL D2 or
LINE IN 2
LINE IN 3
are required to use the RI function. Refer to "RI function
settings" ( p15) for details.
The RI function
The follow system functions can be used with the RI
function.
0 Some functions may not be supported depending on the
product even when an RI connection is used.
∫ Auto Power On
When this unit is in standby mode, if a component
connected by an RI cable is turned on, this unit
automatically turns on.
∫ Direct change
When playback is started on a component connected via RI,
the unit selects that component as the input source.
∫ System off
When this unit is turned off, components connected by an RI
cable are automatically turned off.
∫ Remote controller operations
You can use the remote controller of this unit to centrally
control components by connecting with an RI cable. Refer to
"Remote Controller" - "Operating other components" ( p7)
for information about the buttons and operations for the
components.
0 The RI feature on this unit supports Onkyo CD players,
tuners, network audio players, and RI docks only. It does
not work properly with other devices such as MD
recorders. Refer to the instruction manual of the
component with the RI jack for details.
Preparations
En
11