Remote Control Connection; Setting - Marantz CD6005 Owner's Manual

Contents

Remote control connection

When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly.
Connection
Use the supplied remote connector cable to connect the REMOTE
CONTROL IN connector of this unit to REMOTE CONTROL OUT connector
of the amplifier.

Setting

Turn the EXTERNAL/INTERNAL switch on the unit to "EXTERNAL".
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote sensor of
the amplifier.
%
• To use this unit by itself without connecting an amplifier, turn the switch to
"INTERNAL".
Front panel Display
Connections Playback
Rear panel
Settings
This unit
Remote
connector cable
(supplied) Signal flow
Amplifier
21
Remote
Tips Appendix
Set to "EXTERNAL".
Index