FujiFilm FinePix S5200 Owner's Manual page 56

6.3 CONNECTING TO A PC
3
Camera PC
USB socket
4
Camera operation
◆
When displaying [COMMUNICATION ERROR]
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
110
1 Turn your PC on.
2 Connect the camera to your PC using the USB
cable (mini-B).
●
!
Make sure that the USB cable (mini-B) is connected correctly
and pushed in.
w
Set the Power switch to " ".
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the indicator lamp
blinks alternately green and orange.
h " ¶
DSC" appears on the screen.
h Auto power off is disabled during USB
connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.112 for information on the
disconnection procedure.
●
!
Do not disconnect the USB cable (mini-B) when the camera
is communicating with a PC. See P.112 for information on the
disconnection procedure.
◆
If "CHECKING USB" appears and then
[COMMUNICATION ERROR] is displayed on the
¶
screen, " " (DSC mode) is not selected in "
USB MODE. Disconnect the USB cable (mini-B) to
the camera and restart the procedure from step 1 .
5
Set a PC
Windows 98 / 98 SE / Me / 2000 Professional / Macintosh
●
!
The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the
on-screen instructions.
h FinePixViewer automatically starts up and the
Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions
provided on screen to save the images. To
proceed without saving the images, click the
[Cancel] button.
h A removable disk icon appears and you can use
your PC to transfer files to and from the camera.
If the above operations do not occur, you do not have the required software programs or drivers installed
on your PC. Complete the required PC setup procedures. Then reconnect the camera to your PC.
Windows XP
1 The "Found New Hardware" help message
appears in the bottom-right corner of your screen.
This message will close when the settings are
completed. No action is required.
●
!
This step is not required for subsequent connections.
2 A new removable disk icon appears in the "My Computer" window.
ò
"
FinePixViewer automatically starts up and the Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions provided on screen to save the images. To
proceed without saving the images, click the [Cancel] button.
◆
Regarding the icons
The next time you connect the camera, the removable disk drive icon's name changes to the
"FinePix" icon and name.
Proceed to "USING FinePixViewer" on P.113.
✽ Screen for Windows 2000 Professional
◆
Windows Macintosh
6
111