Quality Settings In Photography Mode; Photo Mode Photography; Quality Mode (Number Of Recorded Pixels) - FujiFilm FinePix S5200 Owner's Manual

p PHOTO MODE PHOTOGRAPHY
˘ QUALITY MODE ( NUMBER OF RECORDED PIXELS )
1
1 0 2 0
0 3
2
1 0 2 0
QUALITY QUALITY
: N F
: N
AUTO AUTO
:
STD STD
3
0 1 0 2
2592x1944: 12 FRAMES FRAMES
:
N
F
:
AUTO AUTO N
:
STD STD
54
q
1 Set the Power switch to " ".
2 Set the Mode dial to Photography mode.
3 Press the " p " button to display the menu on the
screen.
●
!
" ˘ " Quality cannot be selected when setting CCD-RAW
(➡P.95).
The quality setting is retained even when the
camera is off or the mode setting is changed.
1 Press "a" or "b" to select " ˘ " QUALITY.
2 Press "c".
1 Press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
●
!
The numbers to the upper right of setting show the number of
available frames.
●
!
When changing the quality setting, the number of available
frames also changes (➡P.25).

Quality settings in Photography mode

Choose from 6 settings. Using the table below as a guide, select the setting that best suits your
aims.
Quality mode
÷ F (2592 × 1944)
Printing at up to 10R (25.4 × 30.5 cm) / A4 size
÷ N (2592 × 1944)
For better quality, select " ÷
(2736 × 1824)
„
3 (2048 × 1536) Printing at up to 6R (15.2 × 20.3 cm) / A5 size
Printing at up to 4R (10.2 × 15.2 cm) / A6 size
2 (1600 × 1200)
` (640 × 480)
To use for e-mail or web site
◆ ◆
Area shot and quality setting
Area shot excluding " „ " Area shot with " „ "
12 12 12
N N N
Sample uses
F"
Normal shooting provides an
aspect ratio of 4:3 and "
shooting provides an aspect ratio
12 12 12
of 3:2 (same aspect ratio as 35 mm
film and post card).
„
"
3
55