Connecting The Camera Directly To The Printer - Pictbridge Function - FujiFilm FinePix S5200 Owner's Manual

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
4
1 0 2 0
PICTBRIDGE PICTBRIDGE
PRINT WITH DATE PRINT WITH DATE
PRINT WITHOUT DATE PRINT WITHOUT DATE
PRINT DPOF PRINT DPOF OK OK
5
PRINT DPOF OK? PRINT DPOF OK?
TOTAL: 9 SHEETS
TOTAL: SHEETS
CANCEL CANCEL
YES YES CANCEL CANCEL
6
PRINTING PRINTING
1/9 SHEETS SHEETS
CANCEL CANCEL
106
1 Press "a" or "b" to select " u PRINT DPOF".
2 Press "c".
●
!
When [NOT SET DPOF] appears, the DPOF settings are not
specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix S5200 / FinePix S5600 beforehand (➡P.71, 73).
●
!
Even when "WITH DATE" is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
u
" PRINT DPOF OK?" appears on the screen.
Press the "MENU/OK" button to begin printing.
The specified frames (files) are printed
continuously.
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
6.2.2 Specifying images for printing without using DPOF ( single-frame printing )
1
0 1 3 0
2 0
PICTBRIDGE PICTBRIDGE
:
SET SET
1
:
SET SET
2 : ENGLISH ENGLISH
: SET SET
3
:
4 : NTSC NTSC
2
USB socket
(mini-B)
AC-5VX
(Sold separately)
3
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
4
0 1 0 2
P P ICT CTBRI RIDGE GE
PR PRINT NT WITH TH DATE DATE OK OK
PR PRINT NT WITHOUT OUT DATE DATE
PR PRINT NT DPOF DPOF
1 Set the Power switch to " w
" to turn the camera
on.
2 Select " ® ò
" PICTBRIDGE in " " USB MODE
˜
in the " " SET-UP menu (➡P.90).
3 Set the Power switch to "OFF" to turn the
camera off.
●
!
ò
Do not connect to a PC when the " " USB MODE setting is
set to " ® " PICTBRIDGE. See P.126 if you connect to a PC
by mistake.
1 Connect the camera to the printer using the USB
cable (mini-B).
2 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-5VX (sold
separately) to your camera.
●
!
Use an xD-Picture Card that was formatted on FinePix
S5200 / FinePix S5600.
w
Set the Power switch to " ".
"CHECKING USB" appears and then the menu is
displayed on the screen.
●
!
ò
If the menu does not appear, check whether the "
" ® " .
MODE setting is PICTBRIDGE
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select "PRINT WITH DATE"
or "PRINT WITHOUT DATE". If "PRINT WITH
DATE" is selected, the date is imprinted on your
prints.
2 Press "c".
●
!
"PRINT WITH DATE" is not available when the camera is
connected to a printer that does not support date printing.
Continued
" USB
6
107