Camera Connection; Using The Ac Power Adapter (Sold Separately); Connecting To A Tv; Connecting The Camera Directly To The Printer — Pictbridge Function - FujiFilm Finepix E550 Owner's Manual

6 Viewing

6.1 CAMERA CONNECTION

Images
6.1.1 Using the AC Power adapter ( sold separately )
Always use the FUJIFILM "AC Power Adapter AC-3V" (sold separately) or the "AC Power Adapter
AC-3VW" bundled with the PictureCradle CP-FXA10 (sold separately) (➡P.106).
Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading
photographed images to your PC. You can take pictures and play back images without worrying
about depleting the batteries.
●
!
See P.111 for notes on using the AC power adapter.
●
!
When using the optional cradle, the AC power adapter bundled with the cradle must be used. The use of AC power
adapters other than the bundled product will cause faults.
●
!
Only connect or disconnect the AC power adapter when the camera is off.
Connecting or disconnecting the AC power adapter while the camera is turned on temporarily interrupts the power supply
to the camera, so that images or movies being shot are not recorded. Failing to turn the camera off first can also result in
damage to the xD-Picture Card or malfunctions during PC connection.
DC IN 3V
socket
AC-3V

6.1.2 Connecting to a TV

1
A/V OUT
(Audio / Visual output)
socket
DC IN 3V socket
2
Video (yellow)
To terminals
Audio (white)
94
Check that the camera is off. Plug the AC power
adapter connector into the "DC IN 3V" socket and
then plug the AC power adapter into the power
outlet.
●
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
●
!
The shape of the plug and socket-outlet depends on the
country of use.
Do not connect the AC power adapter to charge the
AA-size Ni-MH (nickel-metal hydride) batteries. Use
the battery charger (included) (➡P.10) to charge
the AA-size Ni-MH batteries.
Turn off the camera and TV. Plug the A/V cable
(included) into the "A/V OUT" (Audio/Visual output)
socket.
●
!
When there is a power outlet available, connect the AC
Power Adapter AC-3V.
Plug the other end of the cable into the video input
socket on the TV.
●
!
Images are only sent to the TV in Playback mode.
●
!
When connecting the A/V cable to TV, the LCD monitor is
turned off.
●
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
●
!
The image quality for movie playback is lower than for still
images.
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
When a printer that supports PictBridge is available, images can be printed by connecting the
camera directly to the PictBridge-compatible printer without using a PC.
●
!
In PictBridge function, images photographed on other than a camera may not be printed.

6.2.1 Specifying images for printing on the camera

1
1 0 3 0
2 0
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
３
1 2 4
ＦＲＡＭＥ ＮＯ． ＦＲＡＭＥ ＮＯ． ： ＣＯＮＴ． ＣＯＮＴ．
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＣＣＤ−ＲＡＷ ＣＣＤ−ＲＡＷ ：ＯＦＦ ：ＯＦＦ
言語 言語 ／ＬＡＮＧ． ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ ：ＥＮＧＬＩＳＨ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2
USB socket
AC-3V (sold separately)
3
ＵＳＢ ＵＳＢ
ＣＨＥＣＫＩＮＧ ＵＳＢ ＣＨＥＣＫＩＮＧ ＵＳＢ
4
1 0 2 0
ＰＩＣＴＢＲＩＤＧＥ ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＳＥＴ ＳＥＴ
1 Press the "POWER" button to turn the camera
on.
®
2 Select " " in "USB MODE" in the SET-UP
menu (➡P.79).
3 Press the "POWER" button to turn the camera
off.
●
!
Do not connect to a PC when the USB mode setting is set to
®
" ". See P.116 if you connect to a PC by mistake.
1 Connect the camera to the printer using the USB
cable (included).
2 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-3V (sold
separately) or AC-3VW (included with optional PictureCradle
CP-FXA10) to your camera.
●
!
Use an xD-Picture Card that was formatted in the camera.
1 Set the Mode switch to " w ".
2 Press the "POWER" button to turn the camera
on.
" " appears and then the menu is
s
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
" ".
setting is ®
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select " u PRINT DPOF".
2 Press the "MENU/OK" button.
●
! " d "
When appears, the DPOF settings are not
specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix E550 beforehand (➡P.71).
●
!
Even when "WITH DATE" is specified in the DPOF settings,
the date is not inserted from printers that do not support date
printing.
Continued
6
95