5
Turn the computer over and open the display as far as possible.
6
Carefully lift the palm-rest assembly off the computer base and place it aside.
7
Disconnect the status-light board cable from the media-card reader.
8
Lift the palm-rest assembly off the computer base.
1
status-light board cable
3
palm-rest assembly
9
Remove the keyboard. See "Removing the Keyboard" on page 53.
10
Remove the power-button board. See "Removing the Power-Button Board" on
page 57.
11
Remove the status-light board. See "Removing the Status-Light Board" on page 60.
12
Remove the keyboard daughter board. See "Removing the Keyboard Daughter Board"
on page 63.
2
media-card reader
Removing the Palm Rest
1
2
3
48
|