Safety Instructions - Dell Alienware 17 Owner's Manual

Safety Instructions

Use the following safety guidelines to protect your computer from potential damage and
ensure your personal safety.
WARNING:
information that shipped with your computer. For additional safety
best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
WARNING:
computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to
the power source.
CAUTION:
the computer cover and access any of the components inside the
computer.
CAUTION:
surface is flat and clean.
CAUTION:
its pull-tab, not on the cable itself. Some cables have connectors with
locking tabs or thumb-screws that you must disengage before
disconnecting the cable. When disconnecting cables, keep them
evenly aligned to avoid bending any connector pins. When
connecting cables, ensure that the connectors and ports are
correctly oriented and aligned.
CAUTION:
your computer and then unplug the cable from the network device.
CAUTION:
yourself by touching an unpainted metal surface, such as the metal
at the back of the computer. While you work, periodically touch an
unpainted metal surface to dissipate static electricity, which could
harm internal components.
CAUTION:
them by their edges and avoid touching pins and contacts.
Before working inside your computer, read the safety
Disconnect all power sources before opening the
Only a certified service technician is authorized to remove
To avoid damaging the computer, ensure that the work
When you disconnect a cable, pull on its connector or on
To disconnect a network cable, first unplug the cable from
Before touching anything inside your computer, ground
To avoid damaging the components and cards, handle
Before Working Inside Your Computer
12
|