Table 5.25 Sct Status Code - Fujitsu MJA2500BH - Mobile 500 GB Hard Drive Product/Maintenance Manual

Code(hex)
0000 Command completed without error
0001 Invalid Function Code
0002 Input LBA out of range
0003 Request sector count over flow
0004 Invalid Function Code in Error Recovery Control command
0005 Invalid Selection Code in Error Recovery Control command
0006 Host read command timer is less than minimum value.
0007 Host write command timer is less than minimum value.
Background SCT command was aborted because of an interrupting
0008
host command.
Background SCT command was terminated because of
0009
unrecoverable error.
000A Invalid function code in LONG SECTOR ACCESS command
SCT data transfer command was issued without first issuing an SCT
000B
command.
000C Invalid function code in Feature Control command
000D Invalid Feature Code in Feature Control command
000E Invalid New State in Feature Control command
000F Invalid Option Flag in Feature Control command
0010 Invalid Action Code
0011 Invalid Table ID
0012 Command was aborted due to drive security being locked.
0013 Invalid revision code
Foreground SCT operation was terminated because of
0014
unrecoverable error.
0015 SCT Error Recovery Timeout occurred.
0016 to BFFF Reserved
C000 to FFFE Vender specific
C141-E293

Table 5.25 SCT STATUS code

Definition
5.3 Host Commands
5-75