USINg YOUR ACCESSORIES
Installing/removing the multipurpose blade
NOTE: The multipurpose blade has a spill resistant seal and can be left in work bowl, or removed
before the contents are emptied.
Place the blade on the power shaft.
Liquid level graphics on the side of the
bowl indicate the maximum recommended
levels for thick and thin liquids in the
Firmly secure the work bowl with one
hand, using the handle, not the rim of
the bowl. Then remove the blade by
grasping and pulling it straight up.
Press down firmly on the blade. You will
hear a click when the accessory locks
The multipurpose blade has a leak
resistant seal, so you may leave the
blade in the bowl while pouring out