Dme Tuning (Optional); Transponder Operation - Garmin G2000 Cockpit Reference Manual

2) Scroll the list to find the ADF.
3) Touch the ADF volume slider to select the ADF for transfer.
4) Press and hold the small right knob to transfer the frequencies.

DME TUNING (OPTIONAL)

1) Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2) Scroll the list to find the DME.
3) Touch the DME mode control button to display the DME Mode Window.
4) Touch the NAV1 Mode, NAV2 Mode, or HOLD Mode Button to select
the DME mode.

TRANSPONDER OPERATION

Enter a Transponder Code
1) Touch the Transponder Mode Button on the Touchscreen Controller to
display the Transponder Screen.
2) Use the keypad to select the desired code.
3) Touch the Enter Button to enter the new code.
Or:
1) Touch the Transponder Mode Button to display the Transponder Screen.
2) Turn the small right knob one click either way to erase the previous code
and place the editing cursor on the first digit.
3) Turn the small right knob to enter the first digit.
4) Turn the large right knob to move the cursor to the next digit.
5) Turn the small right knob to enter the next digit, repeat steps 4 and 5 until
complete.
6) Touch the Enter Button, or push the small right knob, to enter the new
code.
190-01264-01 Rev. A
Transponder Display and Controls
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
Nav/Com/XPDR/Audio Panel
XPDR IDENT Button
Transponder Mode Button
19