Garmin G2000 Cockpit Reference Manual page 178

Appendix
NOTE: After the navigation database is installed, the card may be removed.
Updating the active Jeppesen navigation database (not using the
Dual Navigation Database or Automatic Database Synchronization
Features):
1) With the system OFF, insert the SD card containing the new navigation
database version into the top card slot of MFD with the label of SD card
facing left.
2) Turn the system ON. A prompt is presented on the MFD display:
3) Press the NO Softkey to proceed to loading the active database.
4) A prompt is displayed, press the YES Softkey to update the active
navigation database.
5) After the update completes, the display starts in normal mode. Do not
remove power while the display is starting.
6) Turn the system OFF and remove the SD card from the top card slot.
7) Turn the system ON.
8) From the Home Screen on the Touchscreen Controller, touch Utilities > Setup
> Avionics Status.
9) If necessary, touch the Database Tab. The Touchscreen Controller shows a list
of displays on which databases reside.
162
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A