Gmc 720 Afcs Controller System Messages; Miscellaneous System Messages - Garmin G2000 Cockpit Reference Manual

Annunciations & Alerts

GMC 720 AFCS CONTROLLER SYSTEM MESSAGES

System Message
GMC CONFIG – GMC Config
error. Config service req'd.
GMC FAIL – GMC is
inoperative.
GMC MANIFEST – GMC
software mismatch.
Communication halted.
GMC KEYSTK – GMC [key
name] key is stuck.

MISCELLANEOUS SYSTEM MESSAGES

System Message
FPL WPT LOCK – Flight plan
waypoint is locked.
FPL WPT MOVE – Flight plan
waypoint moved.
TIMER EXPIRD – Timer has
expired.
134
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
Comments
Error in the configuration of the GMC 720.
A failure has been detected in the GMC 720. The
GMC 720 is unavailable.
The GMC 720 has incorrect software installed. The
system should be serviced.
A key is stuck on the GMC 720 bezel. Attempt to
free the stuck key by pressing it several times. The
system should be serviced if the problem persists.
Comments
Upon power-up, The system detects that a stored
flight plan waypoint is locked. This occurs when an
aviation database update eliminates an obsolete
waypoint. The flight plan cannot find the specified
waypoint and flags this message. This can also occur
with user waypoints in flight plans that are deleted.
Remove the waypoint from the flight plan if it no
longer exists in any database, or update the waypoint
name/identifier to reflect the new information.
The system has detected that a waypoint coordinate
has changed due to a new navigation database
update. Verify that stored flight plans contain correct
waypoint locations.
The system notifies the pilot the timer has expired.
190-01264-01 Rev. A