Changing The Image Quality Setting ( Quality) - FujiFilm FinePix S5 Pro Owner's Manual

Changing the Image Quality Setting (
The camera supports the following image quality options
(listed in descending order by image quality and file size):
Z Available settings for the image quality
RAW Recorded as CCD-RAW data.
No image processing is performed on the
camera. Select this setting when you
want to process the image on a PC.
FINE JPG Records images in high quality bettered
only by the [RAW] setting. This mode
allows you to record more images than
the [RAW] setting.
NORMAL JPG Allows you to record the largest number
of images.
RAW+ Two images are recorded: one RAW
FINE JPG image and one FINE JPEG image.
RAW+ Two images are recorded: one RAW
NORMAL JPG image and one NORMAL JPEG image.
CAUTION
• When photographs taken at [RAW+FINE JPG] or
[RAW+NORMAL JPG] are viewed on the camera, only
the JPEG image will be displayed.
• When photographs taken at [RAW+FINE JPG] or
[RAW+NORMAL JPG] settings are deleted, both RAW
and JPEG images will be deleted.
QUALITY)
Z Setting the image quality in the [SHOOTING
MENU]
Select the desired quality in the [
[SHOOTING MENU].
See "Setting the [SHOOTING MENU]" (➝p.108).
SHOOTING MENU SHOOTING MENU
ISO ISO
WHITE BALANCE WHITE BALANCE
WB FINE TUNE WB FINE TUNE
QUALITY QUALITY
RECORDING PIXELS RECORDING PIXELS
Z Setting the image quality using QUAL and the
main-command dial
While pressing QUAL, rotate the main-command dial until
the desired setting is displayed in the control panel.
QUALITY] under
RAW RAW
FINE JPG FINE JPG
NORMAL JPG NORMAL JPG
RAW+FINE JPG RAW+FINE JPG
RAW+NORMAL JPG RAW+NORMAL JPG
93