Changing The Sensitivity Setting ( Iso) - FujiFilm FinePix S5 Pro Owner's Manual

Changing the Sensitivity Setting (
ISO sensitivity is the digital equivalent of film speed. The
higher the ISO sensitivity, the less light needed to make
an exposure, allowing higher shutter speeds or smaller
apertures.
ISO sensitivity can be set between values roughly
equivalent to ISO 100 and ISO 3200 in steps equivalent
to 1/3 EV.
Z Available settings for the ISO sensitivity
100/125/160/200/250/320/400/500/640/800/1000/1250/
1600/2000/2500/3200
Z Setting the ISO sensitivity in the [SHOOTING
MENU]
Select the desired sensitivity for the [
[SHOOTING MENU].
See "Setting the [SHOOTING MENU]" (➝p.108).
SHOOTING MENU SHOOTING MENU
ISO ISO
WHITE BALANCE WHITE BALANCE
WB FINE TUNE WB FINE TUNE
QUALITY QUALITY
RECORDING PIXELS RECORDING PIXELS
MEMO
When high ISO sensitivity is used for shooting, and [
RANGE] is set 130% or higher, S-Pixel will be used for the
shooting. And the volume of the image data (including
RAW image data) will be cut to approximately half.
However you can still set the dynamic-range to up to
400% for use with applications.
92
ISO] under
320 320
250 250
200 200
160 160
125 125
100 100
D-
ISO)
Z Setting the ISO sensitivity using ISO and the main-
command dial
While pressing ISO, rotate the main-command dial until
the desired setting is displayed in the control panel or
viewfinder.
CAUTION
Images shot in high-sensitivity photography may appear
coarse and may also be affected by noise such as white
dots.