FujiFilm FinePix S5 Pro Owner's Manual page 167

CENTER BUTTON
This option determines what operations can be performed
by pressing the center of the multi-selector.
[CENTER AF AREA]
Pressing the center of the multi-selector selects the
center focus area or center focus area group (group
dynamic-AF). If [P2: CENTER AREA] or
[P2:CLOSEST SUBJECT] is selected for the [GROUP
DYNAMIC AF] under [H AF], the center of the multi-
selector can be used to toggle between center focus
area groups.
[ILLUMINATE AF AREA]
Pressing the center of the multi-selector illuminates the
active focus area or focus area group (group dynamic-
AF) in viewfinder.
*
[NOT USED]
Pressing the center of the multi-selector has no effect
when the camera is in shooting mode.
The center of multi-selector cannot be used to toggle
*
between the center focus-area groups, even if [P2:
CENTER AREA] or [P2:CLOSEST SUBJECT] is
selected for the [GROUP DYNAMIC AF] under [H AF]
(➝p.152).
MEMO
This function cannot be performed when the focus area is
locked by the focus-selector lock.
MULTI-SELECTOR
Press the multi-selector to ready the camera (wakeup)
from standby status after the auto power save function
was activated, or to initiate autofocus.
[DO NOTHING]
[WAKE-UP]
[INITIATE AUTOFOCUS]
*
How to use the SET UP menu (➝p.138)
The camera will not return to ready from the standby
status when the multi-selector is pressed.
The camera will go to ready by pressing the multi-
selector.
The camera will go to ready by pressing the multi-
selector and will perform autofocus while the multi-
selector is pressed (except when manual is selected
for focus mode).
167