Adjusting Color Balance ([T White Balance]); Changing The Quality Setting ([ Quality]) - FujiFilm FinePix Z100fd Owner's Manual

[ SHOOTING MENU] [ SHOOTING MENU]
Adjusting color balance
([T WHITE BALANCE])
Available Shooting mode: s,
(➝p.54, 55)
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
AUTO: Automatic adjustment
6 : Shooting outdoors in good weather
7: Shooting in shade
9 : Shooting under Daylight fluorescent lamps
0 : Shooting under Warm White fluorescent lamps
- : Shooting under Cool White fluorescent lamps
8 : Shooting in incandescent light
MEMO
• In AUTO mode, the correct white balance may not be
achieved for subjects such as close-ups of people's
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance setting for the
flash is used. Consequently, to achieve a particular
effect, the flash mode should be set to C Suppressed
flash (➝p.61).
• The color tones may vary depending on the shooting
conditions (light source, etc.).
74
WHITE BALANCE WHITE BALANCE
AUTO AUTO
Setting the shooting menu (➝p.67)
• We recommend playing back images after shooting to
check the color tones (white balance).
• Explanation of Terms "White Balance" (➝p.154)
Changing the quality setting
([ QUALITY])
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Photography mode
Quality mode
iF (3264 × 2448)
Printing at up to 10R (25.4 × 30.5 cm/
iN (3264 × 2448)
10 × 12 in.) / A4 size
For better quality, select iF
% (3072 × 2176)
4 (2304 × 1728)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Sample uses