Flash/Bkt - FujiFilm FinePix S5 Pro Owner's Manual

U SET UP
C Press MENU/OK.
2
Change the setting.
FINE TUNE EXPOSURE FINE TUNE EXPOSURE
MATRIX METERING MATRIX METERING
CENTER-WEIGHTED CENTER-WEIGHTED
SPOT METERING SPOT METERING
A Press n or o to select the metering to
change.
B Press q.
C Press n or o to change the setting.
D Press MENU/OK to confirm the setting.
158
HELP HELP
+ 5 / 6 + 5 / 6
+ 4 / 6 ( + 2 / 3 + 2 / 3 )
+ 4 / 6
+ 3 / 6 ( + 1 / 2 + 1 / 2 )
+ 3 / 6
+ 2 / 6 ( + 1 / 3 + 1 / 3 )
+ 2 / 6
+ 1 / 6 + 1 / 6
0
How to use the SET UP menu (➝p.138)

FLASH/BKT

FLASH SYNC SPEED
This option controls flash sync speed. Options range from
1/250 s ([1/250], the default setting) and 1/60 s ([1/60]).
[1/250], [1/200], [1/160], [1/125], [1/100], [1/80], [1/60]
Select one of the above speeds for the flash sync.
[1/250(AUTO FP)]
To enable auto FP high-speed sync when using
Speedlights that support the Nikon Creative Lighting
System (CLS), select [1/250(AUTO FP)] (flash sync
speed will be set to 1/250 s if the built-in flash fires or
the attached Speedlight is not CLS-compatible). When
the camera shows a shutter speed of 1/250 s in
exposure mode or
be activated if the actual shutter speed is faster than 1/
250 s.
Z Fixing shutter speed at the flash sync speed limit
To fix shutter speed at the sync speed limit in shutter-
priority auto or manual exposure modes, select the
shutter speed after the slowest possible shutter speed (30
s or ). An X will be displayed in the flash sync
indicator in the control panel and viewfinder.
, auto FP high-speed sync will