Connecting To A Direct Connection Display Module - Epson TM-U950P - B/W Dot-matrix Printer Operator's Manual

Connecting to a Direct Connection Display Module

(For the TM-U950 Only)
If you are using the printer as a single unit (not connected to an
intelligent module) and you plan to connect a direct connection
display module, follow the steps below. When you use the printer
with the intelligent module, see the IM-403/405 User's Guide for
details.
1. Make sure that the printer is turned off.
2. Plug the cable connector (provided with the direct connection
display module) securely into the printer's display module
connector until it clicks.
CAUTIONS:
Be sure not to connect this cable to the display module
connector, which is to the right of the interface connector.
Do not connect a telephone line to the drawer kick-out
connector.
Setting Up the Printer 1-9