Epson TM-U950P - B/W Dot-matrix Printer Operator's Manual page 37

3. Find the corresponding adjustment position number from the
table below.
Distance A
10 mm (0.39 inch)
8 mm (0.32 inch)
6 mm (0.24 inch)
4 mm (0.16 inch)
2 mm (0.08 inch)
4. Locate the adjusting screw and the positioning plate shown in
the illustration below.
5. Loosen the adjusting screw with a coin or a screwdriver. Move
the positioning plate to the appropriate position and then
tighten the adjusting screw, as shown below. Position 1 leaves
the least paper on the roll, and position 5 leaves the most.
6. Be sure that the detecting lever moves freely after you finish the
adjustment.
7. Re-install the paper roll, as described earlier in this chapter.
#5
Loosen
#4
#3
#2
#1
Secure
Adjustment position number
#1
#2
#3
#4
#5
Setting Up the Printer 1-27