Entering The System Setup Program; System Setup Program Screens; System Setup Program Options - Dell XPS /Dimension Gen 5 Service Manual

Back to Contents Page
System Setup Program
Dell™ Dimension™ XPS Service Manual
Overview
Entering the System Setup Program
System Setup Program Screens
System Setup Program Options
Boot Sequence
Clearing Forgotten Passwords
Clearing CMOS Settings
Overview
Use the system setup program as follows:
To change the system configuration information after you add, change, or remove any hardware in your computer
l
To set or change a user-selectable option such as the user password
l
To read the current amount of memory or set the type of hard drive installed
l
Before you use the system setup program, it is recommended that you write down the system setup program screen information for future reference.
NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work
incorrectly.
Entering the System Setup Program
1. Turn on (or restart) your computer.
2. When the blue DELL™ logo appears, press <F2> immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then
computer and try again.
System Setup Program Screens
The system setup program screen displays current or changeable configuration information for your computer. Information on the screen is divided into three
areas: the options list, active options field, and key functions.
Options List — This field appears on the left side of the system setup program window. The field
is a scrollable list containing features that define the configuration of your computer, including
installed hardware, power conservation, and security features.
Scroll up and down the list by using the up- and down-arrow keys. As an option is highlighted,
the Option Field displays more information about that option and the option's current and
available settings.
System Setup Program Options
NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or they may not appear exactly as listed.
System
Identifies whether the computer's processor supports Hyper-Threading and lists the processor bus speed, processor ID, clock speed, and
Processor Info
L2 cache.
Memory Info Indicates the amount of installed memory, memory speed, channel mode (dual or single), and type of memory installed.
PCI Info The following list displays what (if anything) is inserted into each PCI slot.
Date/Time Displays current date and time settings.
The computer attempts to boot from the sequence of devices specified in this list.
Option Field — This field contains information about each
option. In this field you can view your current settings and
make changes to your settings.
Use the right- and left-arrow keys to highlight an option.
Press <Enter> to make that selection active.
Key Functions — This field appears below the Option Field
and lists keys and their functions within the active system
setup program field.
shut down your