Dell XPS /Dimension Gen 5 Service Manual page 42

connector
connector size
connector data width (maximum)
PCI Express
connector
connector size
connector data width (maximum)
PCI Express
connector
connector size
connector data width (maximum)
Drives
Externally accessible:
Available devices
Internally accessible:
Connectors
External connectors:
IEEE 1394
Video
DVI
Network adapter
PS/2 (keyboard and mouse)
USB
System board connectors:
Primary IDE drive
Serial ATA
Floppy drive
Fan
PCI
PCI Express x1
PCI Express x4
PCI Express x16
Controls and Lights
Power control
Power light
Hard-drive access light
Link integrity light (on integrated network adapter)
Activity light (on integrated network adapter)
Diagnostic lights
Standby power light
Case Front-Panel Light Color
one x1
36 pins
1 PCI Express lane
one x4
98 pins
4 PCI Express lanes
one x16
164 pins
16 PCI Express lanes
one 3.5-inch drive bays
three 5.25-inch drive bays
Serial ATA drive, floppy drive, memory devices, CD
drive, CD-RW drive, DVD drive, DVD-RW drive, and
DVD and CD-RW combo drive
three bays for 1-inch high hard drives
front and back-panel 6-pin serial connectors
15-pin connector
28-pin connector
RJ45 connector
two 6-pin mini-DIN
two front-panel, five back-panel, and one internal
USB 2.0–compliant connectors
40-pin connector on PCI local bus
four 7-pin connectors
34-pin connector
three 5-pin connectors
three 120-pin connectors
36-pin connector
98-pin connector
164-pin connector
push button
green light — Blinking green in sleep state; solid
green for power-on state.
amber light — Blinking amber indicates a problem
with an installed device; solid amber indicates an
internal power problem (see "Power
green
green light — A good connection exists between a
10-Mbps network and the computer.
orange light — A good connection exists between a
100-Mbps network and the computer.
yellow light — A good connection exists between a 1-
GB (or 1000-Mbps) network and the computer.
off (no light) — The computer is not detecting a
physical connection to the network.
yellow blinking light when there is activity on the
network. If there is not any network activity, the light
will be off.
four lights on the front panel (See
Lights.")
AUXPWR on the system board
color options: off (no light), ruby, emerald, sapphire
(default), amber, amethyst, topaz, diamond (See
Lights").
"Diagnostic