Installing The Memory; Removing The System Board Cover - Dell OptiPlex 3011 AIO Owner's Manual

Installing the Memory

1. Align the notch on the memory-card with the tab in the system-board connector.
2. Press down on the memory module until the release tabs spring back to secure them in place.
3. Place the memory cover back into its place and tighten the screw to secure it.
4. Install:
a) back cover
b) VESA stand
c) stand cover
5. Follow the procedures in

Removing the System Board Cover

1. Follow the procedures in
2. Remove:
a) stand cover
b) VESA stand
c) back cover
3. Remove the screw that secures the system board cover to the computer.
4. Lift the system board cover up to remove it from the computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
17