Dell OptiPlex 3011 AIO Owner's Manual page 42

Option
SMART Reporting
USB Configuration
OSD Button Management
Audio
Miscellaneous Devices
Table 4. Security
Option
Admin Password
42
Description
This field controls if the hard drive errors for the integrated drives are reported during
system startup. This technology is part of the SMART (Self Monitoring Analysis and
Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
This field configures the integrated USB controller. If
system is allowed to boot any type of USB mass storage devices (HDD, memory key,
floppy).
If USB port is enabled, device attached to this port is enabled and available for
operation system.
If USB port is disabled, the operation system cannot see any device attached to this
port.
The options for USB configuration:
• Enable Boot Support
• Enable Rear Quad USB Ports
• Enable Front USB Ports
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of
these settings.
Allows you to disable OSD buttons, the OSD buttons are enabled by default.
• Disable OSD buttons
Allows you to enable or disable the integrated audio controllers. By default, the
Enable Audio option is selected.
Allows you to enable or disable various on-board devices.
• Enable Microphone - This option is selected by default.
• Enable Camera - This option is selected by default.
• Enable Media Card - This option is selected by default.
• Disable Media Card
Description
This field lets you set, change, or delete the administrator (admin) password
(sometimes called the setup password). The admin password enables several
security features.
The drive does not have a password set by default.
• Enter the old password
• Enter the new password
• Confirm the new password
The successful changes in the password will take effect immediately.
Boot Support is enabled, the