Recording The Location Information - JVC Everio GZ-E300 User Manual

5
Connection is established; backup starts.
(Operation on this camera)
.
6
Everio Watcher appears on the task bar of the computer.
To see the status of backing up and remaining time, move the arrow
0
to it.
7
Backup is completed.
(Operation on this camera)
.
Tap "OK", or wait for about 10 seconds to turn off the power
0
automatically.
Memo :
0
0
Using Wi-Fi (GZ-EX355/GZ-EX310)

Recording the Location Information

You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a smartphone.
.
Memo :
To obtain the location information, it is necessary to connect the
0
smartphone to the camera and start the smartphone application.
Also, setting the "LOC INFO TRANS INT" for the smartphone application
is necessary.
"Smartphone Application Settings" (A p. 186)
Activate the GPS function of the smartphone in advance.
0
The recorded location information can be used on the software provided
0
with this unit.
What You Need
Smartphone
0
Settings Required in Advance
Set up your camera and smartphone by performing the following operations.
For a smartphone with WPS support, refer to the "Wi-Fi Protected Setup
(WPS)".
*WPS is a method to connect the camera and the smartphone wirelessly by
easy button operations.
Connection by entering the Wi-Fi password
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap the "DIRECT MONITORING" (N) icon in the "Wi-Fi" menu.
(Operation on this camera)
147