JVC Everio GZ-E300 User Manual page 167

7
Tap "MANUAL".
(Operation on this camera)
.
8
Enter the name (SSID) of the access point (wireless LAN router) and tap
"SET".
(Operation on this camera)
.
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
"ABC", for example, enter "A" by tapping once, "B" by tapping twice,
or "C" by tapping 3 times.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
9
Select the type of authentication method (security).
(Operation on this camera)
.
Select according to the setting of your router.
0
10
When authentication method is not set to "NONE", enter a password and
tap "SET".
(Operation on this camera)
.
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
"ABC", for example, enter "A" by tapping once, "B" by tapping twice,
or "C" by tapping 3 times.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
11
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)
.
167