Indoor Monitoring - JVC Everio GZ-E300 User Manual

Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)
How to operate from a smartphone
0
"Using Smartphone Applications" (A p. 175)
Computer (Windows 7)
o
1
Tap the URL button shown on the camera's screen.
(displayed when the computer and the camera are connected
wirelessly.)
.
The URL for the computer to connect to appears.
0
2
Check the URL being displayed on the camera screen, which starts from
"http://".
.
After checking the URL, tap "QUIT" to return to the previous screen.
0
3
Start Internet Explorer (web browser) on the computer and enter the
URL.
.
202

INDOOR MONITORING

Setting (Once setting is done, start from the "Regular
o
Operation" below)
Create a QR code.
Enter values in the required items for indoor monitoring.
o
Password: set a password to connect this camera to the device via access
0
point. (Not more than 8 characters)
HTTP Port: Normally set to "80".
0
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
.
5
Tap "SET FROM QR CODE".