JVC Everio GZ-E300 User Manual page 137

.
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
.
5
Tap "ACCESS POINTS".
(Operation on this camera)
.
6
Tap "ADD".
(Operation on this camera)
.
7
Tap "SEARCH".
(Operation on this camera)
.
The search results appear on the camera's screen.
0
"UNABLE TO FIND THE ACCESS POINT" message appears if there
0
is no access point in the surrounding area.
Using Wi-Fi (GZ-EX355/GZ-EX310)
8
Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9
Register a password.
(Operation on this camera)
.
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
"ABC", for example, enter "A" by tapping once, "B" by tapping twice,
or "C" by tapping 3 times.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
The password is not required if the wireless LAN router is not security
0
protected.
10
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
.
Other methods, such as "Manual Registration" and "WPS PIN
0
Registration" are also available. Refer to the following link for details.
"Registering the Access Points of the Camera to Connect (ACCESS
POINTS)" (A p. 164)
Connecting the smartphone (or computer) to the access point
(wireless LAN router)
.
Connect the smartphone (or computer) to the access point (wireless LAN
0
router) at home.
For details on connections, refer to the instruction manuals of the device
0
in use or the wireless LAN router.
This setting is unnecessary if the smartphone (or computer) has already
0
been connected to the access point (wireless LAN router) at home.
137