Tv Monitoring - JVC Everio GZ-E300 User Manual

Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

TV MONITORING

Setting (Once setting is done, start from the "Regular
o
Operation" below)
Create a QR code.
Enter values in the required items for the TV monitor.
o
MAC address filter: set to "ON" if monitoring images with a specific TV
0
device.
Add the MAC address: register the physical address when monitoring
0
images with a specific TV device. (Up to 8 addresses can be registered)
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
.
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
.
5
Tap "SET FROM QR CODE".
220
.
6
Tap "EXECUTE".
.
Read a QR code.
1
Read a QR code.
(Operation on this camera)
.
2
Tap "YES".
.
3
Tap "OK".
.
Step 2- E is displayed.
0
Set contents are saved.
0
Registering the access points (wireless LAN router) to this
unit
Wi-Fi Protected Setup (WPS) Registration
o
1
Tap "MENU".
(Operation on this camera)