Incoming Message Length; Remote Code - AT&T ML17939 User Manual

Menu setup
Answering system settings

Incoming message length

Use this feature to set the recording time allowed for incoming messages.
The message length is one minute by default.
1. When the telephone is idle, press MENu.
2. Press or
3. Press or
select the desired line. Press ENTER.
4. Press or
5. Press or
6. Press or
Press ENTER to save your selection. The telephone
7.
plays a confirmation tone and returns to the previous menu.

Remote code

If you want to remotely access your mailbox from any touch-tone telephone,
set the remote code to on and enter a three-digit (000-999) remote code. If
you do not use this feature, set the remote code to off. The default remote
access code is 500. To change the settings:
When the telephone is idle, press MENu.
1.
2. Press or
3. Press or
select a desired mailbox. Press ENTER.
4. Press or
5. Press or
6. Press or
If you select on:
a. Press ENTER.
b. Press the dialing keys (0-9) to enter a three-
digit code. Press /
the cursor to the left or right. Press DELETE to
backspace and erase a digit.
c. Press ENTER to save the digits.
-oR-
If you select off, press ENTER to save the setting.
The telephone plays a confirmation tone and returns to the previous menu.
NOTE: The remote code must be different from the priority code.
to scroll to Answering sys. Press ENTER.
to scroll to Mailbox 1 or Mailbox 2 to
to scroll to Ans sys setup. Press ENTER.
to scroll to Msg length. Press ENTER.
to select 1 min, 2 min or 4 min.
to scroll to Answering sys. Press ENTER.
to scroll to Mailbox 1 or Mailbox 2 to
to scroll to Ans sys setup. Press ENTER.
to scroll to Remote code. Press ENTER.
to select on or off.
REPEAT
or /
to move
SKIP
25
aNS SyS SETUP M1 aNS SyS SETUP M1
Call screening Call screening
# of rings # of rings
Msg length Msg length
MSG LENGTH MSG LENGTH
1 min 1 min
2 min 2 min
4 min 4 min
MaILbOx 1 MaILbOx 1
Record memo Record memo
answer ON/OFF answer ON/OFF
ans sys setup ans sys setup
aNS SyS SETUP M1 aNS SyS SETUP M1
# of rings # of rings
Msg length Msg length
Remote code Remote code
REMOTE CODE REMOTE CODE
On On
Off Off
REMOTE CODE REMOTE CODE
1 1
1 1
1 1
1 1
1 1
1 1
50_ 50_