Solving Problems; Solving Network Connection Problems; Solutions When You Cannot Connect Using Quick Connection Mode - Epson PowerLite 4650 Operation Manual

Solving Problems

See the following sections to check for solutions to problems you may have using EasyMP Network
Projection.

Solving Network Connection Problems

Solving Problems During Projection
Error Messages List
Event ID List
Solving Network Connection Problems
Try these solutions depending on your network environment.

Solutions When You Cannot Connect Using Quick Connection Mode

Solutions When You Cannot Connect Using Advanced Connection Mode (Wireless)
Solutions When You Cannot Connect Using Advanced Connection Mode (Wired)
Parent topic:
Solutions When You Cannot Connect Using Quick Connection Mode
When you cannot connect the computer and the projector using Quick Connection Mode, try the
following solutions.
• Check the status of the external devices used for the network connection or the setting environment of
the projector.
• Connect the specified wireless LAN unit to the projector securely.
• Check for any obstacles between the computer and projector, and change their position to improve
communication. Sometimes the indoor environment prevents the projector from being found in a
search.
• Set the radio strength for the network devices to the maximum.
• Check the projector's network settings.
• Set the Connection Mode setting to Quick.
Go to Network > Network Configuration > Wireless LAN > Connection Mode.
• Set an SSID that is different from the SSID for the access point.
Go to Network > Network Configuration > Wireless LAN > SSID.
Solving Problems
68