Switching The Input Source - Epson PowerLite 4650 Operation Manual

2. If you are connected to multiple projectors, click the
projector you want to control.
3. Perform one of the following operations.
• Stop: Click the
The projected image stops. A black screen is projected while stopped.
• Pause: Click the
The projected image pauses. The paused image is projected.
• A/V Mute: Click the
that is displayed.
The audio and video turn off. The logo set for the projector is projected while using A/V Mute, if
available.
4. To return to the projected image, perform one of the following operations.
• Stop or Pause: Click the
• A/V Mute: Click the
Parent topic:

Switching the Input Source

When another signal is being input to the projector while projecting over a network, you can change the
input source from the toolbar.
button on the toolbar.
button on the toolbar.
button on the toolbar, and then click the
button on the toolbar.
button again.
Controlling the Projected Display
button on the toolbar and select the
43
button on the toolbar