Solving Problems; Cannot Connect To The Projector You Want To Use; Cannot Connect The Projector And The Computer Via Wireless Lan; Cannot Connect The Projector And The Computer Via Wired Lan - Epson PowerLite Pro G5450WU Operation Manual

Operation guide - easymp multi pc projection
Hide thumbs Also See for PowerLite Pro G5450WU:
Table of Contents

Advertisement

Solving Problems

Solving Problems

Cannot connect to the projector you want to use

Cannot connect the projector and the computer via wireless LAN

Check
Is the Wireless LAN unit connected?
Is the projector connection mode set to Quick connection
mode?
For wireless LAN connections, is the wireless LAN setting
enabled when the computer is in power save mode?
Are there any obstacles between the wireless LAN
connection access point and the computer or projector?
Is the computer's wireless LAN radio strength set to low?
Does the Wireless LAN conform to 802.11a, 802.11b, or
802.11g?
Is Wireless LAN Power set to Off in the projector's
Wireless LAN menu?
Is the SSID setting different?
Is the same WEP key set?

Cannot connect the projector and the computer via wired LAN

Check
Is the network cable connected correctly?
Check that the Wireless LAN unit is securely connected.
EasyMP Multi PC Projection cannot connect using Quick connection mode. Set the connection mode
to Advanced connection mode. See your projector User's Guide for details.
Enable the Wireless LAN.
Sometimes the indoor environment prevents the projector from being found in a search. Check for
any obstacles between the access point and the computer or projector, and change their position to
improve communication.
Set the radio strength to maximum.
It is only compatible with standards 802.11a, 802.11b, and 802.11g, and not with other standards such
as 802.11.
Set Wireless LAN Power to On in the projector's Wireless LAN menu from the Configuration menu.
See your projector User's Guide for details on the projector's wireless LAN settings.
Set the computer, the access point, and the projector to the same SSID.
When selecting WEP from Security, set the access point, the computer, and the projector to the same
WEP key.
Check that the network cable is securely connected.
Remedy
Remedy
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easymp multi pc projection

Table of Contents