Solving Problems - Epson 826W - PowerLite WXGA LCD Projector Getting Started Manual

Solving Problems

If messages fail to display on the selected projectors, check the
following:
If the message does not appear on any of the projectors, check the
■
firewall settings on the computer running EMP Monitor. Make
sure EMP Monitor is selected as an exception.
■ If an individual projector fails to display the message, make sure
the
Standby Mode
set to
Communication On
Try restarting the projector. If a projector user or presenter has
■
pressed the button to stop the message broadcast, the
Esc
projector will not receive messages until it is restarted.
© 2009 Epson America, Inc. 4/09
setting in the projector's Extended menu is
.
CPD-27543
Message Broadcasting
9