Epson PowerLite 4650 Operation Manual page 79

Event Cause
ID
0433 Cannot play transferred images.
0484 Communication was disconnected from the
computer.
04FE EasyMP Network Projection ended
unexpectedly.
04FF A system error occurred in the projector.
0891 Cannot find an access point with the same
SSID.
0892 The WPA/WPA2 authentication type does not Check that the wireless LAN security settings
match.
0893 The WEP/TKIP/AES encryption type does not
match.
0894 Communication was disconnected because
the projector connected to an unauthorized
access point.
0898 Failed to acquire DHCP.
0899 Other communication errors
089A The EAP authentication type is not the same.
089B EAP server authentication failed.
089C EAP client authentication failed.
089D Key exchange failed.
Remedy
Restart EasyMP Network Projection.
Check the status of network communications.
Restart the projector.
Restart the projector.
Set the computer, the access point, and the
projector to the same SSID.
are correct.
Contact your network administrator for more
information.
Check the DHCP server to see if it is
operating correctly and check the LAN cable
to see if it is connected correctly. If you are
not using DHCP, turn off the DHCP setting.
If restarting the projector or EasyMP Network
Projection does not solve the problem,
contact Epson as described in your projector
User's Guide.
Check that the wireless LAN security settings
are correct. Also, check if the certificate is
installed correctly.
79