Connecting The Projector And A Computer Over A Network System (Wired) - Epson PowerLite 4650 Operation Manual

4. If the projector you want to connect to is not displayed in the search results, search for it using one of
the following methods.
• Automatic Search: Searches for the projector automatically.
• Manual Search: Searches for the projector based on a specified IP address or projector name.
• Profile: Searches for the projector based on a previously saved profile.
5. Select the projector you want to connect to, and then click Connect.
When Projector Keyword is set to On from the projector, the keyword entry screen is displayed.
6. Enter the keyword displayed on the LAN standby screen, and then click OK.
When the connection is complete, the computer screen is projected. The following EasyMP Network
Projection toolbar is displayed on the computer screen.
Note: When a connection is established, the input source for the projector automatically switches to the
LAN source if no other signal is being input. If the input source does not automatically switch to the LAN
source, press the LAN button.
Parent topic:
Related tasks
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
Searching for Network Projectors Automatically
Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name
Performing a Profile Search

Connecting the Projector and a Computer over a Network System (Wired)

When your projector is set up as indicated below, you can connect the projector to an existing network
system and project the computer's screen over the network.
• A LAN cable is connected to the projector.
• The projector's connection method is set to Advanced.
Connection Methods
28