Table of Contents
Advertisement
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket, hard drive connector
cable, and screws. These components are included in the Hard Drive Hardware Kit, spare part number
716179-001.
Description
1-TB, 5400-rpm, 9.5-mm
750-GB, 5400-rpm, 9.5-mm
500-GB, 5400-rpm, 9.5- and 7.0-mm
320-GB, 5400-rpm, 9.5- and 7.0-mm
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
Remove the hard drive:
1.
Remove the two Phillips PM2.5×5.75 screws (1) that secure the hard drive to the computer.
2.
Disconnect the hard drive connector cable (2) from the system board.
40
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page
37).
Optical drive on page
Spare part number
676521-001
634250-001
683802-001
645193-001
38).
Advertisement
Table of Contents
