Table of Contents
Advertisement
4.
Insert a screw driver or similar thin tool into the keyboard release hole, and then press on the back
of the keyboard until the keyboard disengages from the computer.
5.
Turn the computer right-side up with the front toward you.
6.
Lift the rear edge of the keyboard until it rests at an angle.
7.
Swing the keyboard (1) up and forward until it rests upside down on the palm rest.
8.
Release the zero insertion force (ZIF) connector (2) to which the keyboard cable is attached, and
then disconnect the keyboard cable (3) from the system board.
48
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Advertisement
Table of Contents
