Dell PowerEdge VRTX Owner's Manual page 16

• A deployment setup that allows you to configure the CMC's network settings during initial system setup.
• Menus to configure the iDRAC in each server module.
• Status information screens for each server module.
• Status information screens for the modules installed in the back of the enclosure, including the I/O module,
blower modules, CMC, KVM, and power supplies.
• An IP Summary screen listing the IP addresses of all components in the system.
• Real time power consumption statistics, including high and low values, and average power consumption.
• Ambient temperature values.
• AC power information.
• Critical failure alerts and warnings.
Using The LCD Module Menus
The LCD Setup menu displays a menu of items that can be configured.
Use the up and down arrow buttons to highlight an item in the menu or highlight the Back icon if you want to return to
the Main menu.
Press the center button to activate your selection.
Key Action
Left and right arrows Move between screens
Up arrow or down Move to the previous or next option on a screen
arrow
Center button Select and save an item and move to the next screen
Main Menu
From the Main menu, you can navigate to one of the following screens:
Screen Description
LCD Setup Contains the options such as Language Setup, LCD Orientation, and the Default Screen.
KVM Mapping Contains the options to map or unmap the KVM to the servers.
DVD Mapping Contains the option to map or unmap the DVD drive on the chassis to the servers.
Enclosure Displays status information for the chassis.
IP Summary Displays IPv4 and IPv6 information about CMC and iDRAC.
LCD Setup Menu
The LCD Setup Menu displays a menu of items that can be configured:
Language Setup Select the language you want to use for LCD screen text and messages.
LCD Orientation Select either Tower Mode or Rack Mode based on the installation orientation of the chassis.
Default Screen Select the screen (Main menu, Front Status, Rear Status, Side Status, or Custom) that is
displayed when there is no activity on the LCD panel.
Use the up and down arrow buttons to highlight an item in the menu or highlight the Back icon if you want to return to
the Main menu.
Press the center button to activate your selection.
16