Dell PowerEdge VRTX Owner's Manual page 117

11. To remove the PCIe cage door cover:
a) Remove the two screws securing the PCIe cage door cover to the cage door.
b) Slide the cage door cover out of the cage door.
Figure 70. Removing and Installing the PCIe Cage Door Cover
1. PCIe cage door cover
2. screws (2)
3. hooks on the door cover (2)
4. PCIe cage door
12. Remove the following:
a) system top cover
b) cooling shroud
c) cooling-fan assembly
d) control panel
e) top and bottom mounting ears
13. To convert the top mounting ear to rack left ear:
a) Remove the screws securing the ear cover to be replaced by the cartridge, and remove the cover.
b) Align the tabs on the cartridge with the slots in the ear, and lower the cartridge until firmly seated.
When properly seated, the screw holes on the other end of the cartridge align with the screw holes on the ear.
c) Attach the two screws to secure the cartridge to the ear.
CAUTION: Take care while installing the cartridge, to prevent the LCD module cable from being pinched or
crimped.
117