Dell PowerEdge VRTX Owner's Manual page 116

a) server modules
b) hard drives
c) power supplies
CAUTION: The blower closeout door is spring loaded. To prevent injury, exercise care when placing your
hand or fingers inside the blower module bay.
d) blower modules
e) blower module bay
5. To remove the system side cover:
a) Press the release button on the inside of the chassis wall, to disengage the side cover from the chassis.
b) Slide the side cover toward the back of the system to disengage the cover hooks from the chassis, and remove
the cover away from the chassis.
Figure 69. Removing and Installing the System Side Cover
1. system side cover
2. hooks on the system side cover (15)
3. release button
6. Rotate the system feet inward and lay the system on its side on a flat, stable surface with the cover release latch
side on top.
NOTE: For systems installed with the wheel assembly, ensure that you lay the system on its side on a flat,
stable surface with the wheel assembly extending off the edge of the surface.
7. If installed, remove the wheel assembly and power cable retention bracket.
8. Remove the system base cover.
9. Open the system.
10. Remove the PCIe cage door.
116