Dell PowerEdge VRTX Owner's Manual page 131

Error Code Message Information
Details
Action
VLT0102
Message
LCD Message
Details
Action
VLT0103
Message
LCD Message
Details
Action
VLT0104
Message
LCD Message
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see
name > voltage is greater than the upper warning
Processor module <
threshold.
name > voltage is outside of range.
Processor module <
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see
name > voltage is greater than the upper critical
Processor module <
threshold.
name > voltage is outside of range.
Processor module <
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see
name > voltage is outside of the allowable range.
Processor module <
name > voltage is outside of range.
Processor module <
Getting Help.
Getting Help.
Getting Help.
131