Dell Force10 Z9000 Manual page 32

To install a new fan module, follow these steps:
Step Task
Twist the latching screws so that the fan screen detaches from the system as shown in the following figure.
1
PSU0
Latching
screw
Remove the screen and set it aside.
2
Take the fan module out of the shipping box.
3
Use the grab handle to slide the module into the bay.
4
Tighten the securing screw on the side of the module.
5
Replace the fan screen.
6
Twist the latching screws to the fan screen until it is securely attached to the system.
7
32 | Fans
PSU1
Fan modules
Fan screen
Latching
screw