Dell Force10 Software Defined Networking Deployment Manual page 29

of-instance {
Defaults None
Command Modes EXEC
Command History
Version 9.1(0.0)
Usage If debugging needs to be enabled for all packets, use the debug openflow packets
Information
packet-type all command.
Related reload conditional nvram-cfg-change
Commands
features-reply
flow-mod
flow-removed
get-config-reply
get-config-
request
hello
packet-in
packet-out
port-mod
port-status
queue-get-
config-reply
queue-get-
config-request
set-config
stats-reply
stats-request
vendor
of-id }
Enter the keyword of-instance followed by the OF instance ID.
Introduced on Z9000 and S4810.
Enable debugging for features-reply
packets.
Enable debugging for flow-mod packets.
Enable debugging for flow-removed
packets.
Enable debugging for get-config-reply
packets.
Enable debugging for get-config-request
packets.
Enable debugging for hello packets.
Enable debugging for packet-in packets.
Enable debugging for packet-out packets.
Enable debugging for port-mod packets.
Enable debugging for port-status packets.
Enable debugging for queue-get-config-
reply packets.
Enable debugging for queue-get-config-
request packets.
Enable debugging for set-config packets.
Enable debugging for stats-reply packets.
Enable debugging for stats-request packets.
Enable debugging for vendor packets.
29