Show Openflow Flows; Z-Series, S4810; Shutdown (Openflow Instance) - Dell Force10 Software Defined Networking Deployment Manual

Vlan List
Vlan Mbr list
Usage Use the show openflow command to display general information such as version,
Information capabilities, and supported actions.
Related openflow of-instance
Commands

show openflow flows

Display detailed information about OpenFlow instances.

Z-Series, S4810

Syntax show openflow flows[of-instance{of-id}][table{acl|lb|mac|route|
vlan}flow-id{flow-id}]
Parameter
of-instance
acl | lb |
table
mac | route | vlan
flow-id
Defaults None
Command Modes EXEC
Command History
Version 9.1(0.0)
Related show openflow
Commands

shutdown (OpenFlow Instance)

Enable or disable the OpenFlow instance.
Z-Series, S4810
Syntax [no] shutdown
:
:
Create or modify an OpenFlow instance.
of-id
Enter the keyword of-instance followed by the OF instance ID to
display details of all flows installed for the specified OF instance.
Range is 1 to 8.
Enter the keyword table followed by the table type and the keyword
flow-id followed by the flow ID to display details for the specified
flow-id
flow:
acl
lb
mac
route
vlan
Introduced on Z9000 and S4810.
Display general information about OpenFlow instances.
Display ACL table information.
Display learning bridge table information.
Display MAC table information.
Display routing table information.
Display VLAN table information.
35