Sdn Commands; Connect Retry-Interval; Z-Series, S4810 - Dell Force10 Software Defined Networking Deployment Manual

SDN Commands

The following commands are for Software Defined Networking (SDN) OpenFlow commands.
•

connect retry-interval

• controller
• debug openflow packets
• flow-map
• interface-type
• learning-switch-assist
• multiple-fwd-table
• of-instance (Interface)
• openflow of-instance
• show openflow
• show openflow flows
• shutdown
connect retry-interval
Configure the timed interval (in seconds) that the OpenFlow (OF) instance will wait after requesting a connection with
the OpenFlow controller.

Z-Series, S4810

Syntax connect retry-interval interval
Parameter
interval
Defaults 15 (seconds)
Command Modes OPENFLOW INSTANCE
Command History
Version 9.1(0.0)
Usage After the interval time lapses, the OpenFlow instance will reattempt to establish a connection
Information to the OpenFlow controller.
Related openflow of-instance
Commands
Enter the number of seconds the OF instance will wait after
attempting to establish a connection with OF controller. Range is 10–
60.
Introduced on Z9000 and S4810.
Create or modify an OpenFlow instance.
9
27